Dukane iQ Series User Manual download pdf (Page 26)

Page 20

iQ Series, Auto User’s Manual

Dukane Manual Part No. 403-573-02

Optional MPC Interface Connections

Complete the same basic connections used for the stan-

dard iQ Auto conguration as previously described.

• AC Line Input

• System Control Inputs/Status Outputs

• Ultrasound Output

• Grounding (optional)

In addition to completing Steps 1- 4 of the basic con-

nections as previously described, complete Steps 5 and

6 to wire the MPC Control Inputs/Status Outputs as

described below.

Figure 3-2 Generator Front View - Optional MPC Model

Optional Multi- Probe Control

(MPC) Interface Model

The iQ Auto MPC model includes an optional MPC

Interface circuit board that powers and controls an external

MPC multi- probe control module. This external module,

(that can be ordered with a minimum of two probe controls

up to a maximum of 16 probe controls), must be purchased

in addition to generator Model 40AT060-2N-MO (iQ Auto

with MPC option) for a fully functional MPC system.

The connections needed for the MPC Interface board are

described below. Connections required for the external

MPC module are also described below.

Details about the various system connectors and their

pin assignments are covered in the next section.

Step 5. MPC I/O - Wire the MPC control/input signals

and status output signals terminal block to the

user-supplied automation control system - E

in Figure 3-2.

Step 6. MPC INTERFACE - Attach one end of the MPC

Interface cable (Dukane # 200-1408-XX) to the

MPC Interface connector on the iQ Auto panel

-F in Figure 3-2. Connect the other end of the

cable to the MPC INTERFACE connector on

the right rear of the MPC module.

NOTE

The MPC Interface cable is a separate line

item on the iQ Auto system order. The -XX

at the end of the cable number species

cable length. This will vary depending on

your MPC installation.

POWER INLET

CONTROL

CONNECTOR

U/S CONNECTOR

U/S

SYSTEM I/O

OPTIONAL MPC

CONNECTORS

POWER

STATUS (LED)

MPC I/O

MPC INTERFACE





GROUNDING STUD

AMPLITUDE

20%

100%

AMPLITUDE

ADJUSTMENT

CONTROL

See NOTE

on Page 22.

NOTE

Amplitude adjustment will affect ALL

MPC points.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 57 58

Comments to this Manuals

No comments

Dukane iQ Series User Manual Page 26

Comments to this Manuals

Related products and manuals for Power supply units Dukane iQ Series