Dukane iQ Series User Manual download pdf (Page 36)

Page 30

iQ Series, Auto-Plus User’s Manual

Dukane Manual Part No. 403-591-00

Options for U/S Activation Connections:

• Optionally monitor the U/S Active status output on

I/O connector Pin 4.

This status output signal will activate when

U/S is ON.

• Optionally monitor the Ready status output on sys-

tem I/O connector Pin 4.

This status output signal will activate when the

system, including the MPC module is ready.

4. Other options the operator can check:

• Fault Status output signals

Fault Status output signals are available for Overload

(Pin 3) or Any Fault (Pin 5).

These status outputs will activate when a fault

occurs:

An Overload Fault latches until the next time

U/S is activated.

Any Fault status activates when any fault is de-

tected by the system. The output will latch until

U/S is activated unless the fault is Overtempera-

ture or Power Not OK.

Five fault conditions are monitored by the iQ Auto-

Plus system for Any Fault:

•Average Overload

(Automatically resets on next cycle, or until an

activation of Fault Reset Input)

•Peak Overload

(Resets same as Average Overload)

•Overtemperature

(Automatically resets on cool-down)

•Power Not OK

(AC line voltage under minimum voltage)

•Frequency Overload

(Automatically resets on next cycle, or until an

activation of Fault Reset Input)

5. Check MPC Channels

Check that all MPC channels can be selected and

activated. The automation control system activates

input selection bits.

Select a channel: PROBE SELECTION STATUS

indicator illuminates GREEN when it is the selected

channel.

Activate ultrasound: Activate the iQ Auto-Plus ul-

trasound output on I/O connector Pin 12. The PROBE

SELECTION STATUS indicator on the selected chan-

nel should switch to RED (from GREEN).

The probe on the selected channel should deliver

ultrasonic power.

Repeat this test for all MPC channels.

Continued from Previous Page

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

Comments to this Manuals

No comments

Dukane iQ Series User Manual Page 36

Comments to this Manuals